**************************************************************************************
  Conversion Program for Data File
                                                   << leucvt_win >>    Version 1.00
**************************************************************************************

  Thank you for purchasing the LINEEYE portable communication analyzer and its options.
  This program is for converting data into text files, which are saved in the CF card
  by LE-8200 plus OP-SB84.
  To use it correctly, please read this instruction thoroughly.

======================================================================================
1. Appropriate model

   The USB communication expansion board "OP-SB84" for LE-8200.

======================================================================================
2. Copyright and Exception Clause

   LINEEYE holds the copyright on this program.
   LINEEYE shall not be liable for any damages arising from the program.
   The user of the product has all responsibility of this program.
   It is prohibited to copy of this program without prior permission from LINEEYE.
   The contents of this program are subject to change without any notice.

======================================================================================
3. Notice

   It supports data only measured by OP-SB84.
   This program cannot convert text format file to DT format file.
   This program does not include an installer. To remove the program, remove the file
   itself.

======================================================================================
4. Preparation
     (1) Create a directly in the PC, and copy "leucvt_win.exe" there.

     (2) Copy saved data in the CF card to the directly created in 4-(1).

======================================================================================
5. Convert Data

     (1) Double-click on "leucvt_win.exe".

     (2) Click on "..." at "Folder" and select the directly.

     (3) Measured data files (.DT) are listed at "File list:".
         (Press "Refresh" to update the file information.)

     (4) Click the targe file to convert. It is able to select more than one files at 
         once. Press "Select all" to select all files. Press "No select" to cancel the
         selection.

     (5) Select the format for conversion.
         In case of saving USB packets, three types of the data format can be selected:
         1)PACKET(Standard display only)
         2)DETAIL(Standard display and Detailed display)
         3)TRANSLATE(Standard display and Detailed display and Translate display)
         
         In case of saving Vbus data, two types of file format can be selected:
         1)NORMAL(Text file)
         2)CSV(CSV file)
         
         All flies previously selected at "5-(4)" will be converted.
         
     (6) Press "StartConversion" to start converting data.

     (7) After the conversion, the ".txt" or ".csv" format file with same name will be made in the
         same directly.


======================================================================================

  LINEEYE Co, LTD.

    URL         :http://www.lineeye.com
    E-mail      :trade@lineeye.co.jp

**************************************************************************************