**************************************************************************************
  Conversion Program for Data File
                                                   << lepcapcvt >>    Version 1.00
**************************************************************************************
  Thank you for purchasing the LINEEYE portable communication analyzer and its options.
  This conversion program is for using the data by the WireShark/ Ethereal measured by 
  LE-8200 + LAN communication expansion board. It can convert data to the Pcap format. 
  To use it correctly, please read this instruction carefully.

======================================================================================
1. Appropriate model
 
   The LAN communication expansion board "OP-SB89" for LE-8200. 

======================================================================================
2. Copyright and Exemption Clause

   LINEEYE holds the copyright on this program.
   LINEEYE shall not be liable for any damages arising from the program.
   The user of the product has all responsibility of this program.
   It is prohibited to reprint of this instruction without prior permission from LINEEYE.
   The content of this instruction is subject to change without any notice.

======================================================================================
3. Notice

   It supports data only measured by OP-SB89.
   This program cannot convert Pcap format file to DT format file.
   This program does not include the installer. To remove the program, remove the file
   itself.
   To use data by Wireshark/Ethereal, download these software from the Internet by your 
   own responsibility. LINEEYE does not answer any questions regarding to these software. 

======================================================================================
4. Preparation
     (1) Make a directly in the PC, and copy "lepcpcvt.exe" there.

     (2) Copy saved data in the CF card to the directly made in 4-(1).

======================================================================================
5. Convert Data

     (1) Double-click on "lepcapcvt.exe".

     (2) Click on "..." at "Folder" and select the directly.
         (Measured data files (.DT) were copied in that directly.)

     (3) Measured data files are listed at "File list:".
         (Press "Refresh" to update the file information.)

     (4) Click the file for conversion data. It is able to select more than one files at 
         once. Press "Select all" to select the all files. Press "No select" to cancel the
         selection.

     (5) Press "StartConversion" to start converting the data.

     (6) After the conversion, the ".pcap" format file with same name will be made in the
         same directly.


======================================================================================

  LINEEYE Co, LTD.
	
    URL         :http://www.lineeye.com
    E-mail      :info@lineeye.com

**************************************************************************************