LINEEYE CO., LTD.
Software Version History for LE-PC300G
Version. 1.07 Aug. 30, 2017
- Fixed the bug of "BERT result reception and conversion".
- Fixed the bug of protocol configuration on LE-2500 (the bug only by Version 1.06),
- Fixed the bug of the data property display.
- Fixed the bug of erros on time stamps and text conversion on the data captured by OP-FW10/OP-FW10G/OP-FW10R.
- Adds the configurated value of idle time and time stamp to the header of the output text by text conversion.
- The number of send data table for such as FLOW control mode configuration and SEND action of the trigger increased from 16 types to 160 types.
Version. 1.06 Mar. 19, 2015
- Increased number of editable simulation data tables from 16 to 160.
- End-of-frame character of ASYNC can be set up to 2 characters.
- Following items have added to the configuration.
On/Off of the flow control (BERT function)
Permission setting of simulation and BERT (Other settings)
- Fixed the bug of End-of-frame character setting of ASYNC
[ detail ]
1.05 Feb. 27, 2013
- Add the character search in the search conditions.
The previous "Character search condition" is renamed as "Character (HEX) search condition".
- Support Modbus protocol.
- Record in another data files after appointed time.
- Add the starting options.
-r "[name of configuration]"
After starting the LE-PC300G, selected analyzer which is set by the configuration starts measuring automatically. (able to set more than one units)
-q
Adjust the format of data files to enable to read the files immediately.
- Increase the maximum block number (number of files) from 2000 to 2048.
- Add SEND BRK command in the program editor. (when using with LE-3500)
- Save the search conditions after closing the application.
- Change the name of starting menu for On-line help as "LE-PC300G help".
- Correct the minor bug of character input mode for data tables.
[ detail ]
Version. 1.04 Feb. 27, 2013
- Temporary version (same as Version 1.05)
Version. 1.03 May. 18, 2012
- Display each communication frame in different line for ASYNC/SYNC protocol.
(Break signal of ASYNC is displayed as “?b”)
- Display property of measured data. [file menu] -> [data property]
- Add On-line Help
- Add “Cut/Copy/Paste” functions in the transmission data table on Simulation feature.
- Change the zoom switching display from combo box to track bar.
- Pause the display of “Delay/ Flow/ Polling (master/slave)” while measuring.
- Able to select data table number “0-9” by TEN key.
- Add “50000, 200k, 417k” on I2C baud rate.
- Change the icon of tool bar to full color.
- Move the “Remote setting list” button next to “Remote setting” button.
- Display the name of some icons by right clicking on tool bar.
- Convert ASYNC measured data into CSV. Each frame is divided by time stamp.
- Save text CSV conversion setting.
[Bug correction]
- Correct the bug that some data with control lines is not converted into text properly.
- Correct the bug that frame divided by time stamp is not outputted after CSV conversion.
- Correct the bug that “excepting time stamp/ idle time” is not functioned properly. (Text conversion)
- Correct the bug of PPP/ I2C/ SPI translation conversion when setting of “number of character: Max”. (Text conversion)
- Correct the bug of CSV conversion ended in error after “receiving BERT result and conversion”.
- Correct a minor bug of program editor in Program mode.
- Correct a minor bug of HDLC X.25 packet translation display.
- Correct a minor bug of IrLAP text conversion. “NS” and “NR” are displayed in opposite place.
- In the test conversion of LAPD frame translation, “None” is displayed when the last bit of RD is “0”. In the previous version, “INFO” was displayed. (to be same as LE-8200)
- Change the specification of “A1h” for EBCDIC and “7Fh”/ “BFh” for EBCDIK, to be same as LE-8200.
- Correct other minor bugs on configuration.
[ detail ]
Version. 1.02 Jul. 30, 2010
[Add/Improve]
- Add the display of PPP translation/IrLAP translation/I2C frame/SPI frame.
- Add the SPI configuration of LE-3500.
LE-3500 has to be Ver1.02 or later, which supports SPI communications.
- Compatible with OP-FW10G/OP-FW10.
- Add the spin button when inputting numbers. (except some parts)
- Shorten the error detection time such as disconnecting the USB cable.
- Increase the numbers of characters per line when converting into
the text file. (approx. 1M characters)
- Increase the number of columns to set when converting into CSV file.
(Max.255 -> Max.65535)
- Add the program editor (leprogedit) for program mode.
- Change the display of time-stamp/idle-time according to the resolution.
- Support USB driver(V2.06)for Windows® 7.
[Debug]
- Correct the miner bug of scrolling when HDLC translation display.
- Correct the miner bug of configuration procedure for POLLING master mode.
- Correct the miner bug of saving the BERT measurement other than Repeat mode.
- Correct the typo in the configuration. Change "Printer mode" to "Printer model".
- Change the miner bug of trigger summary counter1
[ detail ]
Version. 1.01 Jul. 30, 2009
- Add transmission/reception of simulation programs, save/load function.
- Add setting of transmission/reception for simulation programs.
(Add because it used to take long time to transfer simulation programs.)
- Correct the problem of retrieval function when using bit masks (W0-W2) as default value.
- Correct the problem of time scale always being displayed as "x10ms" while measuring.
- Correct the minor problem of incorrect display when using OP-SB5G/6G/5F/6F.
- Correct the minor problem when loading files from the upper models.
- Correct the dialogue box for Windows® Vista.
- Change the design of menu bar for Windows® Vista.
- Change the design of text convert window for Windows® XP/Vista.
- Change "Open file", "Save file" dialogue to the OS standard style.
- Correct other minor bugs.
[ detail ]
Version. 1.00 Oct. 30, 2008
LE-PC300G released